Our catalog is under construction with new products being added daily! Please call with any questions (231) 582-9971.
36" Walk-Behind Trencher (Tracked)
Here are some basic instructions for operating the Ditch Witch C16X Walk-Behind Trencher:
-
Pre-Operation Checks:
- Ensure the trencher is on a flat, stable surface.
- Check fuel and oil levels.
- Inspect the digging chain and teeth for wear and damage.
- Make sure all safety guards are in place.
-
Starting the Trencher:
- Turn the fuel valve to the "ON" position.
- Set the choke lever to the "CHOKE" position if the engine is cold.
- Turn the ignition key to the "START" position until the engine starts.
- Once the engine is running, move the choke lever to the "RUN" position.
-
Operating the Trencher:
- Position yourself at the rear of the machine, behind the control console.
- Engage the digging chain by pulling the chain control lever.
- Use the throttle lever to adjust the engine speed.
- Slowly move the trencher forward using the drive control lever.
- Guide the trencher along the desired trench path, maintaining a steady speed.
-
Trenching Tips:
- Avoid making sharp turns while trenching.
- Keep an eye on the trench depth and width to ensure consistency.
- If the trencher encounters an obstacle, stop and remove it before continuing.
-
Shutting Down the Trencher:
- Disengage the digging chain by releasing the chain control lever.
- Move the throttle lever to the "IDLE" position.
- Turn the ignition key to the "OFF" position.
- Turn the fuel valve to the "OFF" position.
-
Post-Operation Checks:
- Clean the trencher to remove any dirt and debris.
- Inspect the digging chain and teeth for wear and damage.
- Check fuel and oil levels for the next use.
- For more detailed instructions, you can refer to the operator's manual.
If you have any other questions or need further assistance, feel free to ask!
Specifications
- Engine: 16 hp (11.9 kW) Vanguard™
- Fuel: Gasoline
- Cooling: Air
- Number of Cylinders: 2
- Rated Speed: 3600 RPM
- Fuel Consumption @ Rated Power: 1.33 GPH (5 LPH)
- Trench Depth: Up to 36 inches (914.4 mm)
- Trench Width: Up to 6 inches (152 mm)
- Operating Weight: 1895 lbs (860 kg)
-
Dimensions:
- Width: 35.8 inches (909 mm)
- Length: Up to 94 inches (2.4 m)
- Height (Transport): Up to 63 inches (1.6 m)
-
Travel Speed:
- Forward: 120 ft/min (36.6 m/min)
- Reverse: 120 ft/min (36.6 m/min)
- Digging Chain Speed: 309 ft/min (94.2 m/min)
The C16X is designed for reliability and productivity, making it ideal for tight spaces and efficient pipe and cable installation.